Roku SoundBridge Manuel d'utilisateur télécharger pdf (Page 18)

6. Turn on your SoundBridge by plugging the power cord into the right side of the device,

then into the wall AC outlet. Verify that the screen displays the Roku logo.

7. Upon startup, SoundBridge will attempt to connect to any wireless access point within

range that does not require a password. If your home wireless network requires no

password and there are no other wireless networks in the vicinity (such as those spilling

over from a neighbor’s house), then your SoundBridge should automatically connect with

no additional conguration, and you will see a list of music servers on your network to

connect to.

However, it’s possible you will need to congure your wireless network as described below:

- If your SoundBridge detects more than one available wireless network, then you will

need to congure SoundBridge’s Wi-Fi settings. Choose “System Conguration” from

the main menu, and then select “Select Wi-Fi SSID & Password.” You will then see a list

of available wireless networks. If you see your desired network, select it. If you don’t see

the desired network, make sure that your wireless router is within range and that it is

functioning properly.

- Some wireless networks don’t “advertise” themselves (a.k.a., “closed networks”). If your

wireless access point is functioning properly but you do not see the network listed, you

should enter your wireless network name by selecting “Specify a wireless network...”

(Refer to your wireless access point’s documentation or utility software if you don’t know

the name of your wireless network.)

- Next, your SoundBridge will ask you whether the wireless connection requires a

password. If you do not have a wireless password, select “No” and skip to the next

section. If you do have a wireless password, select “Yes.” Read the instructions on the

screen to determine what type of wireless password you have on your network. If you

are unsure, you may wish to refer to your wireless router documentation. (See hints

below for help nding your wireless access point’s password.)

- Select “OK” to reboot the unit. Upon restarting, SoundBridge should automatically

connect to the network you have specied.

If the connection is successful, all the available music libraries will be listed on your screen. Use

the up and down arrows on your remote to navigate to your desired library and press Select to

begin browsing your music library.

Troubleshooting Wi-Fi Setup

If you have problems connecting to the SoundBridge to your music library via Wi-Fi, please

check the following:

1. Are the LED lights lit up inside the CompactFlash Wi-Fi adapter? If not, your card is not

receiving power. Make sure the SoundBridge is powered on (the LED screen is lit).

Remove and re-insert the CF card with the label facing away from you. It should require

gentle pressure to be inserted into the CF slot.

2. Is SoundBridge within range of your wireless network signal? Performance varies

depending on wireless network hardware, physical barriers such as walls, and signal

interference.

3. Is your computer on and your wireless access point plugged in?

4. Is your music server software running on your computer? Are your music sharing options

enabled? (See page 11.)

5. Did you enter your password correctly (if you have one), including case sensitive

characters?

Obtaining Your Wireless Access Point’s Password

Follow these instructions to determine your wireless access point password, and be sure to

have a pen ready to make a note of the case-sensitive password as well as the password type,

either hexadecimal (hex) or ASCII.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 30 31

Commentaires sur ces manuels

Pas de commentaire

Roku SoundBridge Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Joueurs Roku SoundBridge